Mainly used in construction, shipbuilding, rail vehicles, electronics, electrical appliances, consumer durables and other fields.

Features of 6 Series Aluminum Sheet

The 6-series aluminum alloy is an aluminum alloy with magnesium and silicon as the main alloying elements and Mg2Si phase as the strengthening phase. The alloy has the advantages of medium strength, high corrosion resistance, no stress corrosion cracking tendency, good welding performance, unchanged corrosion performance in the welding zone, good formability and process performance. When the alloy contains copper, the strength of the alloy can be close to that of the 2-series aluminum alloy, and the process performance is better than that of the 2-series aluminum alloy, but the corrosion resistance is deteriorated, and the alloy has good forging properties. The most widely used 6-series alloys are 6061 and 6063 alloys, which have the best comprehensive properties. The main products are extruded profiles, which are the best extruded alloys. The alloys are widely used as building profiles.

Application of 6 Series Aluminum plate

6005 Extruded profiles and pipes are used for structural parts requiring higher strength than 6063 alloy, such as ladders, TV antennas, etc. 

6009 Auto Body Panel

6010 Sheet: Automotive Body

6061 requires various industrial structures with certain strength, high weldability and high corrosion resistance, such as pipes, rods, shaped materials, plate

6063 Industrial profiles, building profiles, irrigation pipes and extruded materials for vehicles, benches, furniture, fences, etc.

6066 Forgings and Welded Structural Extrusions

6070 Extruded materials and tubes for heavy duty welded structures and the automotive industry

6101 High-strength rods, electrical conductors and radiator materials for buses

The main features are low density, high tensile strength, high elongation, and good fatigue strength. It can be directly anodized, but cannot be strengthened by heat treatment.

The surface is polished with more than 400 meshes, no milling, and it can be directly anodized

Machining deformation can be controled within 0.15mm, thickness tolerance can reach within 0.05mm, which is the world's leading standard and technology

Using unique technology, high hardness, strong bending resistance which is much better than any special mild steel